News & announcements

Industrial development

Tyre Recycling Plant

A plant that shreds end-of-life tyres and separates them into rubber granules, steel wire and fibre, with optional pyrolysis and carbon-black units that add fuel oil and carbon black to the product list.

What it makes
Rubber granules, steel wire and fibre; optionally fuel oil and carbon black
Built from
End-of-life car and truck tyres
Serves
Construction, steel mills, cement and ceramics, rubber and paint makers
Our role
Plan, build, launch and supervise
Illustration: a tyre recycling site with pyrolysis reactors, a shredding hall and bales of steel wire

The plant

From a disposal problem to valuable materials.

Used tyres are shredded in stages, and the steel and fibre are separated from the rubber. The clean granules go to rubber products such as tiles, sports surfaces and construction fillers, and the steel goes to steel mills. An optional pyrolysis unit converts granules into fuel oil, carbon black and a gas that powers the process itself.

What the plant delivers

  • Many products from one waste

    Rubber, steel and fibre, plus oil and carbon black with the optional units: several sellable streams from a material that is hard to dispose of.

  • Continuous, automated lines

    PLC-controlled lines need only a few operators per shift.

  • High-purity separation

    Magnets, screens and grinders separate steel and fibre from clean rubber.

  • Safe and clean operation

    Closed-loop cooling water, dust extraction under negative pressure and a full safety package around the pyrolysis unit.

  • Self-fuelling

    The gas produced by pyrolysis heats the reactor, which reduces the need for outside fuel.

  • Modular growth

    Start with shredding, then add pyrolysis, a carbon-black mill or a rubber-tile line.

How it works

From raw material to finished product.

Four steps recover the rubber and steel. Two optional units add fuel, carbon black and tiles.

  1. 01

    Receive the tyres

    Tyres are loaded onto the feed conveyor.

  2. 02

    Shred in two stages

    A primary and a secondary shredder cut them into small pieces.

  3. 03

    Separate steel and fibre

    Magnets and screens take out the steel wire and fibre.

  4. 04

    Collect the rubber granules

    Clean granules are collected and packed.

  5. 05

    Pyrolysis (optional)

    Granules become fuel oil, carbon black and a gas that is reused in the process.

  6. 06

    Rubber tiles (optional)

    Granules are pressed with adhesive into coloured tiles and safety surfaces.

Product range

  • Rubber granules
  • Steel wire
  • Fibre
  • Fuel oil (optional)
  • Carbon black (optional)
  • Rubber tiles (optional)

Built for your location

We adapt the layout, utilities, materials and standards to your site and your market. Wherever you plan to build, we can develop this plant with you.

The plants

  • Open for development

    Compressed Charcoal Plant

    Charcoal from agricultural residues

    Shisha and grilling charcoal pressed from date stones, nut shells and other residues, with a clean, even burn.

  • Open for development

    PET Kitchens Factory

    Kitchen cabinets and wardrobes

    Kitchen doors and panels in PET film, resistant to heat, moisture and scratches, made to order in a wide palette.

  • Open for development

    Motor Oil Plant

    Lubricants

    Engine, diesel, hydraulic and gear oils, blended to exact recipes and tested batch by batch.

Images on these pages are illustrative visualisations created to show each plant. They are not photographs of operating sites.

Ready to talk about this plant?

Tell us where you want to build. We will come back with a plan.